Using lumber industry by-products and under-utilized wood species once landfilled or burned as waste by forestry operators or sawmills, ARAUCO manufactures a variety of particleboard, medium density fibreboard (MDF) and FIBREX® thin high density MDF. ARAUCO's ability to service a broad range of market needs stems from a diverse range of technological capabilities.

AraucoPly is Radiata Pine plywood manufactured with phenolic resin in accordance with international product standards. It’s ideal for interior and exterior applications as furniture, decorative paneling, industrial projects and construction.

 

BOISE GLULAM gives you extra-long roof spans to curved beams and common header to dramatic columns with the rich, natural look of wood with important benefits engineered in.

BCI® Joists are lighter weight offering long spans and best of all, strong floors that last. AJS I-joists have a solid-sawn flange, are high quality, high performance floor and roof joists available in the Eastern U.S. and Canada.

Versa-Lam® LVL beams and headers lead the industry in bending strength and E-value, offering better performance and longer spans overall value across multiple widths and depths for residential, light commercial, or multifamily projects.

Boise Cascade Rimboard makes construction simpler. With a lengths of 12' and 24' and depths that match BCI® and AJS® I-joists, construction time is reduced. It can handle seismic and high wind loads. No special backing is required for siding or deck attachment.

Chemonite® is the registered trade name for wood protected by ACZA, or ammoniacal copper zinc arsenate, against termites and fungal decay.

Chemonite wood has been safely and successfully used since the 1940's in commercial and industrial applications. It is leach-resistant in water and ground.

Chemonite wood offers all of the appealing characteristics of wood along with prolonged service life. It is protected against the major causes of wood degradation: rot, decay, termites, and marine organisms, and studies indicate resistance to carpenter ants, woodpeckers, and fire.

Chemonite wood has been safely and successfully used since the 1940's in commercial and industrial applications. It is leach-resistant in water and ground.

Hardel Mutual Plywood manufactures standard and custom plywood panels at our state–of–the–art mill in Chehalis, WA. Our high-efficency, environmentally–friendly plant is equipped to provide an amazing variety of panels from commodity CDX sheathing to cabinet–quality fine hardwood panels.

LP Legacy Premium Sub-Flooring is a premium, strand-based composite wood panel designed for demanding subfloor applications. The product is proven tough and APA-verified for exceptional stiffness and strength. LP Legacy sub-flooring represents more than 40 years of innovation from Louisiana-Pacific, a company known and trusted for manufacturing excellence.

MicroPro™ technology is a revolutionary way to pressure treat wood for decks, fences, landscaping, and general construction uses. MicroPro technology offers many benefits, including significantly improved corrosion performance. MicroPro/SmartSense® pressure treated wood with the MicroPro technology exhibits corrosion rates on metal products similar to CCA pressure treated wood and untreated wood.

Smart Sense pressure treated wood is lighter in color compared to current copper based treated products. The attractive color allows DIYers and contractors to build pressure treated products using treated wood that is lighter, fresher, and more natural in appearance.

The NatureWood® wood preservative is a waterborne, alkaline copper quaternary preservative system developed to provide long-term protection of wood exposed in exterior applications. The preserved wood is the most widely used alternative to traditional CCA pressure treated wood and has a warranty against structural damage caused by decay and termites. The durable treated products are ideal for structural lumber, sill plates, outdoor furniture, playground products, patios, decks, garden edging, and landscaping structures.

Use hot-dip galvanized, stainless steel, or other fasteners and hardware as recommended by the hardware manufacturer.

Pacific Woodtech is the premier manufacturer of engineered wood products.

Rosboro offers high-quality lumber including western species studs and dimension lumber.

Rosboro's green and dry Douglas Fir and KD Hem-Fir studs are available in standard and custom trim lengths for the builder wanting quality studs that haven’t been “cherry-picked.”

Rosbor's dimension lumber includes:

• #2 & btr. Kiln Dried Douglas Fir
• 2×4, 2×6, 2×8
• 8’ to 20’

Rosboro’s glulam products are the most cost-effective engineered wood products on the market today. Rosboro’s products are the best choice for a wide range of applications, including floor and roof beams, wall framing, and columns.

• X-Rim™ | Next-Generation Rim
• X-Beam™ | Next-Generation Glulam 24F-V4
• X-Beam™ Columns
• Big Beam DF™ 30F-E/DF2
• Western Structures™ Custom Glulam
• Rosboro Manufactured Timber | RMT®

 

With Sierra Pacific Industries’ acquisition of the Oregon-based Seneca companies, SPI is proud to be operating in California, Oregon, Washington and Wisconsin.

Sierra Pacific Industries is a third-generation family-owned forest products company based in Anderson, California. The firm owns and manages nearly 1.9 million acres of timberland in California and Washington, and is the second largest lumber producer in the United States. Sierra Pacific Industries is committed to managing its lands in a responsible and sustainable manner to protect the environment while providing quality wood products and renewable power for consumers.

The dimensional stability of TJI joists help them resist warping, twisting and shrinking that can lead to squeaky floors.

TimberStrand® Laminated Strand Lumber (LSL) is a suitable solution for a diverse range of applications such as tall walls, beams, rim board, sill plates and so much more.

Parallam® Parallel Strand Lumber (PSL) product creates long, clear spans and support heavy loads, whether inside or out in the elements.

From window openings to garage door headers, Microllam® LVL is a versatile solution that supports heavy loads without worry.

When it comes to value, what really counts is not how much the MDF costs, but how much it costs to use. Not all MDF panels are alike and may differ by wood species, fiber size, binders, density and consistency. All of these factors have a significant impact on key elements of your processing costs, including:

• Cutting-tool life
• Machine center throughput speed and amp load
• Machined profile quality as it relates to the need for sanding, filling and other steps prior to finishing
• Amount/thickness of coating or laminating material required for adequate coverage
• Defect rates
• Labor

Controlling quality from raw materials to finished products allows us to build custom plywood that meets precise customer expectations. From Marine Grade to our proprietary HDF Ultra-Core™ laminating panels, we engineer our softwood plywood for maximum value.

We offer a variety of grades and thicknesses of Southern Yellow Pine plywood panels to meet most budgets in virtually any application. At a lighter weight than comparable panels, Weyerhaeuser plywood delivers the goods by using moisture resistant glues that hold up to the elements.